The C100 is the entry point into our high-capacity clinical range, built for hospitals, clinics, and research centres generating enough waste that an hourly burn rate matters more than a daily one. Unlike the MP series’ hot-hearth design, the C100 uses a large, rounded cylindrical chamber with four burners that circulate heat directly through the waste itself — a good fit for general medical waste with high plastic content, which burns hot enough to act as its own fuel source once combustion is underway.
The rounded chamber shape is deliberate: it eliminates the cold corners a rectangular chamber can develop, keeping energy circulating efficiently and cutting the fuel needed per cycle. Loading happens through a full-width front door with viewing ports, so operators can monitor the burn without opening the chamber, and automatic loading options like a bin tipper or ram charger are available for higher-throughput sites.
Key Benefits
- Large rounded cylindrical chamber designed to eliminate cold spots and circulate heat efficiently
- Four burners optimize airflow directly through the waste load
- Full-width front loading door with viewing ports for safe monitoring during the burn
- Automatic loading options available: bin tipper, waste hopper, or ram charger
- One-button HMI touch-screen operation with automatic data logging
- Leaves less than roughly 3% ash residue per cycle
- CE certified, built to EU and WHO standards
Specifications Snapshot
- Burn rate: up to 100 kg/hr (roughly 1,600 kg/day)
- Chamber volume: approximately 3 m³ (3m length, 1.17m diameter)m³
- Loading method: front-loading, with automatic options available
- Gas retention time: 2 seconds
- Fuel options: diesel, LPG, natural gas, biofuel
Ideal For
- Hospitals and clinics needing high, continuous throughput
- Research centres with high-plastic-content medical waste
- Facilities wanting automatic loading to reduce manual handling
- Sites planning to add wet scrubber or venturi filtration
Frequently Asked Questions
. What makes the C100's chamber different from the MP series?
The C100 uses a large rounded cylindrical chamber with four burners circulating heat through the waste itself, rather than the MP series’ hot-hearth design heating from below — it’s built specifically for higher-plastic, higher-energy medical waste at a higher hourly throughput.
Does the C100 need additional filtration?
That depends on your waste categories and where the unit is being installed — a Venturi wet scrubber or other filtration system is commonly paired with the C100, and we can advise based on your specific requirements.
How much ash is left after a cycle?
Typically less than around 3% of the original waste volume, which can be safely removed before the next load goes in.
Can loading be automated?
Yes — bin tipper, waste hopper, and ram charger loading options are all available alongside the standard front-loading door.
Call to Action
Need continuous high-throughput clinical waste destruction?
Tell us your hourly or daily volume and waste composition, and we’ll confirm whether the C100 fits or whether a higher-capacity model makes more sense.
Speak to our team today!